ABB DCS550 - Option Modules

263
Signal and parameter list
3ADW000379R0501 DCS550 Manual e e
Signal / Parameter name
min.
max.
def.
unit
97.25 EMF ActFiltTime (actual EMF filter time)
EMF actual filter tim
e constant for EMF VoltActRel (1.17). Is used for the EMF controller and the EMF feed
forward.
Int. Scaling: 1 == 1 ms Type: I Volatile: N
0
10000
10
ms
97.26 - 97.28 Unused
Group 98: Option modules
98.01 Unused
98.02 CommModule (communication modules)
For the communication modules following selections are available:
0 =
NotUsed no communication used, default
1 =
Fieldbus The drive communicates with the overriding control via an R-type fieldbus adapter
connected in option slot 1. This choice is not valid for the Modbus.
2 =
Modbus The drive communicates with the overriding control via the Modbus (RMBA-xx)
connected in option slot 1.
Attention:
To ensure proper connection and communication of the communication
modules with the SDCS-CON-F use
the screws included in the scope of delivery.
Int. Scaling: 1 == 1 Type: C Volatile: N
NotUsed
Fieldbus
NotUsed
-