ABB DCS550 - North American Standards; Regulatory Compliance; Type Code

13
The DCS550
3ADW000379R0501 DCS550 Manual e e
Regulatory Compliance
The converter modules are designed for use in industrial environments. In EEA countries, the components
fulfill the requirements of the EU directives, see table below.
European Union Directive
Manufacturer's Assurance
Harmonized Standards
Machinery Directive
98/37/EEC
93/68/EEC
Declaration of Incorporation
EN 60204-1
[IEC 60204-1]
Low Voltage Directive
73/23/EEC
93/68/EEC
Declaration of Conformity
EN 61800-1
[IEC 61800
-1]
EN 60204
-1
[IEC 60204-1]
EMC Directive
89/336/EEC
93/68/EEC
Declaration of Conformity
(
If all installation instructions concerning cable
selection, cabling and EMC filters or dedic
ated
transformer are followed.)
EN 61800-3
[IEC 61800-3]
in accordance with
3ADW000032
North American Standards
In North America, the system components fulfill the requirements of the table below.
Rated supply voltage
Standards
up to 525 V
AC
−
See UL Listing www.ul.com / certificate no. E196914
−
Approval: cULus The spacings in the modules were evaluated to table 36.1 of
UL 508 C. Spacings also comply with table 6 and table 40 of C22.2 No. 14-05.
− or on request
Type code
The type code contains information on the specifications and configuration of the drive.
Description see below:
The drive’s basic type code: DCS550-AAX-YYYY-ZZ-BB
Product family:
DCS550
Type:
AA
= S0
Standard converter modules IP00
Bridge type:
X
= 1
Single bridge (2-Q)
= 2
2 anti parallel bridges (4-Q)
Module type:
YYYY
=
Rated DC current
Rated AC voltage:
ZZ
= 05
230 V
AC
- 525 V
AC
Fan voltage:
BB
= 00
Standard
F1:
no fan 20 A / 25 A
24 V
DC
internal 45 A - 100 A
F2, F3:
115 V
AC
/ 230 V
AC
; single phase
F4:
230 V
AC
; single phase
Additional information:
CC