ABB DCS550 - List of Available EMC Filters; ③ EMC Filters (E1); ④ Auxiliary Transformer (T2) for Converter Electronics and Fans

58
Accessories
3ADW000379R0501 DCS550 Manual e e
③
EMC filters (E1)
List of available EMC filters:
Size
Converter type (2-Q)
Converter type (4-Q)
Filter type for 440 V
AC
Filter type for 500 V
AC
F1
DCS550-S01-0020
DCS550-S02-0025
NF3-440-25
NF3-500-25
DCS550-S01-0045
DCS550-S02-0050
NF3-440-50
NF3-500-50
DCS550-S01-0065
DCS550-S02-0075
NF3-440-64
NF3-500-64
DCS550-S01-0090
DCS550-S02-0100
NF3-440-80
NF3-500-80
F2
DCS550-S01-0135
DCS550-S02-0150
NF3-440-110
NF3-500-110
DCS550-S01-0180
DCS550-S02-0200
NF3-500-320
DCS550-S01-0225
DCS550-S02-0250
DCS550-S01-0270
DCS550-S02-0300
F3
DCS550-S01-0315
DCS550-S02-0350
DCS550-S01-0405
DCS550-S02-0450
NF3-500-600
DCS550-S01-0470
DCS550-S02-0520
F4
DCS550-S01-0610
DCS550-S02-0680
DCS550-S01-0740
-
-
DCS550-S02-0820
NF3-690-1000 *
DCS550-S01-0900
DCS550-S02-1000
* available on request
④
Auxiliary transformer (T2) for converter electronics and fans
The auxiliary transformer (T2) is designed to supply the module’s electronics and cooling fans.
Input voltage: 230 / 380 to 690 V
AC
, ± 10 %, single-phase
Input frequency:
50 to 60 Hz
Output voltage:
115 / 230 V
AC
single-phase
Transformer
(T2)
Power
[VA]
Weight
[kg]
Power
losses [W]
Fuse
F2 [A]
Secondary
current [A]
T2
1400
15
100
16
6 @ 230 V
12 @ 115 V
Commissioning hint:
T2 is designed to work as a
115 V
AC
to 230 V
AC
isolation transformer to
open or avoid ground loops.
Connect the 230 V
AC
at the 380 V
AC
and
600
V
AC
taping according to the drawing on the left hand side.
150
106
125
128
148
100 +-5
35
0
115
230
0
380 400 415 450 500 525 575 600 660 690
6.3 mm Faston
ME_TRA_002_T2_a.ai