ABB DCS550 User Manual

8
Introduction
3ADW000379R0501 DCS550 Manual e e
Introduction
Chapter overview
This chapter describes the purpose, contents and the intended use of this manual.
Before You Start
The purpose of this manual is to provide you with the information necessary to control and program the drive.
Study carefully the Safety instructions
at the beginning of this manual before attempting any work on or with
the drive. Read this manual before starting-up the drive.
Note:
This manual describes the standard DCS550 firmware.
What this manual contains
The Safety instructions are at the beginning of this manual.
Introduction
, the chapter you are currently reading, introduces you to this manual.
The DCS550
, this chapter describes the basic properties of the DCS550.
Mechanical installation
, this chapter describes the mechanical installation of the DCS550.
Planning the electrical installation
, this chapter describes how to plan the electrical installation of the DCS550.
Electrical installation
, this chapter describes the electrical installation of the DCS550.
Electronic board details
, this chapter describes the electronics of the DCS550.
Accessories
, this chapter describes the accessories for the DCS550.
Start-up
, this chapter describes the basic start-up procedure of the DCS550.
Firmware description
, this chapter describes how to control the DCS550 with standard firmware.
Serial field bus communication
, this chapter describes the communication capabilities of the DCS550.
AP (Adaptive Program)
, this chapter describes the basics of AP and instructs how to build an application.
Winder
, this chapter describes the winder and instructs how to use the winder blocks of the DCS550.
Signal and parameter list
, this chapter contains all signals and parameters.
DCS Control Panel
, this chapter describes the handling of the DCS Control Panel.
Fault tracing
, this chapter describes the protections and fault tracing of the drive.
Appendix A: Quick start-up diagrams
Appendix B: Firmware structure diagrams
Appendix C: Index of signal and parameters

ABB DCS550 Specifications

General

Brand	ABB
Model	DCS550
Category	DC Drives
Language	English