ABB DCS550 - Setting of Parameter Groups 51, 90 and 92; Further Information; Switch on Sequence

94
Communication
3ADW000379R0501 DCS550 Manual e e
Setting of parameter groups 51, 90 and 92
*For proper communication shown values have to be used
Further information
Output and input parameters 51.08, …, 51.25 can also be connected directly to the desired DCS550
parameters. In this case please take care that the RCNA-01 adapter gets the changed values and also take
care, that the used parameters are deleted from group 90 to prevent data trouble.
Switch on sequence
Please see the example at the end of this chapter.