ABB DCS550 User Manual

154
Signal and parameter list
3ADW000379R0501 DCS550 Manual e e
Type:
A short code shows the data type:
I = 16-bit integer value (0, …, 65536)
SI = 16-bit signed integer value (-32768, …, 32767)
C = text string (ENUM)
Volatile:
Y = values are NOT stored in the flash, they will be lost when the drive is de-energized
N = values are stored in the flash, they will remain when the drive is de-energized
Parameter groups list
This chapter explains the function and valid values or selections for all parameters. They are arranged in
groups by their function. The following table gives an overview of all parameter groups:
Group
Description
10
Start / stop select
11
Speed reference inputs
12
Constant speeds
13
Analog inputs
14
Digital outputs
15
Analog outputs
16
System control inputs
19
Data storage
20
Limits
21
Start / stop
22
Speed ramp
23
Speed reference
24
Speed control
25
Torque reference
26
Torque reference handling
30
Fault functions
31
Motor temperature
34
DCS Control Panel display
40
PID controller
43
Current control
44
Field excitation
45
Field converter settings
50
Speed measurement
51
Fieldbus
52
Modbus
61
Winder control
62
Diameter adaption
63
Tension torque
64
Write selection
66
Winder program control
83
AP control
84
AP
85
User constants
86
AP outputs
88
Internal
90
Receiving data sets addresses
92
Transmit data sets addresses
97
Measurement
98
Option modules
99
Start-up data

ABB DCS550 Specifications

General

Brand	ABB
Model	DCS550
Category	DC Drives
Language	English