ABB DCS550 - Page 257

257
Signal and parameter list
3ADW000379R0501 DCS550 Manual e e
Signal / Parameter name
min.
max.
def.
unit
86.02 Block2Out (block 2 output)
The value of function block 2 output [
Block2Output (84.15)
] is written to a sink (signal/parameter) by means of
this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.03 Block3Out (block 3 output)
The value of function block 3 output [
Block3Output (84.21)
] is written to a sink (signal/parameter) by means of
this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.04 Block4Out (block 4 output)
The value of function block 4 output [
Block1Output (84.27)
] is written to a sink (signal/parameter) by means of
this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.05 Block5Out (block 5 output)
The value of function block 5 output [
Block1Output (84.33)] is written to a sink (signal/pa
rameter) by means of
this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.06 Block6Out (block 6 output)
The value of function block 6 output [
Block1Output (84.39)
] is written to a sink (signal/parameter) by means of
this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.07 Block7Out (block 7 output)
The value of function block 7 output [
Block1Output (84.45)
] is written to a sink (signal/parameter) by means of
this index
pointer [e.g. 2301 equals SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.08 Block8Out (block 8 output)
The value of
function block 8 output [Block1Output (84.51)
] is written to a sink (signal/parameter) by means of
this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.09 Block9Out (block 9 output)
The value of function block 9 output [
Block1Output (84.57)
] is written to a sink (signal/parameter) by means of
this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.10 Block10Out (block 10 output)
The value of function block 10 output [
Block1Output (84.63)] is written to a sink (signal/parameter) by means
of this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.11 Block11Out (block 11 output)
The value of function block 11 output [
Block1Output (84.69)] is written to a sink (signal/parameter) by means
of this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-
86.12 Block12Out (block 12 output)
The value of function block 12 output [
Block1Output (84.75)] is written to a sink (signal/parameter) by means
of this index pointer [e.g. 2301 equals
SpeedRef (23.01)].
The format is
-xxyy, with: - = negate signal/parameter, xx = group and yy = index.
Int. Scaling: 1 == 1 Type: I Volatile: N
-9999
9999
0
-