ABB IRB 4600 Foundry Prime - Page 134

Inspecting labels
Use this procedure to inspect the labels on the robot.
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
to the robot, before entering the robot work-
ing area.
1
See the figure in Location of information
labels on page 133.
Check all labels.2
Replace any missing or damaged labels.3
134 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
3 Maintenance
3.4.7 Inspecting information labels
Continued