ABB IRB 4600 Foundry Prime - Inspecting Dampers

3.4.10 Inspecting dampers
Location of dampers
The figure shows the location of all dampers to be inspected.
xx0800000297
Dampers axis 2A
Dampers axis 3B
Damper axis 5C
Required equipment
NoteSpare part no.Equipment
See Spare part lists on
page 399.
Damper
Content is defined in section
Standard tools on page 393.
-Standard toolkit
Additional equipment - Foundry Prime
NoteArt. no.Equipment
Mercasol3HAC034903-001Rust preventive
3HAC026759-001Sikaflex 521FC
12340011-116Loctite 574
Brush
3HAC035355-001Foundry Prime touch up kit
Continues on next page
Product manual - IRB 4600 Foundry Prime 141
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
3 Maintenance
3.4.10 Inspecting dampers