ABB IRB 4600 Foundry Prime - Inspecting Signal Lamp (Option)

3.4.12 Inspecting Signal lamp (option)
Location of signal lamp
Signal lamp is an option.
Located as shown in the figure.
A
B
C
D
xx0800000290
Signal lampA
R3.H1 +, R3.H2 -B
R2.CPC
R2.CSD
Required equipment
NoteEquipment
For spare parts no. see Spare parts - Spare
parts options in Product manual, spare
parts - IRB 2600.
Signal lamp
Content is defined in section Standard tools
on page 393.
Standard toolkit
These procedures include references to the
tools required.
Other tools and procedures may be required.
See references to these procedures in the
step-by-step instructions below.
Additional equipment - Foundry Prime
NoteArt. no.Equipment
Mercasol3HAC034903-001Rust preventive
3HAC026759-001Sikaflex 521FC
12340011-116Loctite 574
Brush
3HAC035355-001Foundry Prime touch up kit
Continues on next page
146 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
3 Maintenance
3.4.12 Inspecting Signal lamp (option)