ABB IRB 4600 Foundry Prime - Lifting and Turning a Suspended Mounted Robot

2.4.2 Lifting and turning a suspended mounted robot
Introduction
How to lift and turn the robot to a suspended position using the turning accessory
is described in the lifting instruction delivered with the turning accessory. Article
numbers for the accessory and the instruction is specified in Special tools on
page 394. Any additional equipment required is specified in the instruction for the
lifting accessory. Contact ABB for more information.
Illustration
xx1500002116
64 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
2 Installation and commissioning
2.4.2 Lifting and turning a suspended mounted robot