ABB IRB 4600 Foundry Prime - Page 63

NoteAction
xx0800000291
When the robot is lifted the roundslings will
adjust themselves.
CAUTION
When lifting, the robot will tilt slightly back-
wards! Be careful not to damage the connec-
tion box at the base of the robot!
9
• A: Area where the connection
box can be damaged while lifting.
Lifting capacity:
• See Required equipment on
page 61
Lift the robot with an overhead crane.10
Product manual - IRB 4600 Foundry Prime 63
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
2 Installation and commissioning
2.4.1 Lifting robot with roundslings
Continued