ABB IRB 4600 Foundry Prime - Inspecting the Leak Proof O-Ring and Pressure Relief Valves

3.4.11 Inspecting the leak proof o-ring and pressure relief valves
Location of the leak proof o-ring
The pressure relief valves and leak proof o-ring is located as shown in the figure.
Leak proof o-ringA
Relief valve (2 pcs)B
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard tools on page 393.
Standard toolkit
Brush
3HAC035355-001Foundry Prime touch up kit
Leak spray
Required consumables
NoteArticle numberConsumable
Mercasol3HAC034903-001Rust preventive
3HAC026759-001Sikaflex 521FC
12340011-116Loctite 574
Continues on next page
Product manual - IRB 4600 Foundry Prime 143
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
3 Maintenance
3.4.11 Inspecting the leak proof o-ring and pressure relief valves