ABB IRB 4600 Foundry Prime - Inspecting the Oil Level, Axis 2 Gearbox

3.4.2 Inspecting the oil level, axis 2 gearbox
Location of axis 2 gearbox
The axis 2 gearbox is located in the lower arm rotational center, underneath the
motor attachment. The oil plugs are shown in the figure.
xx0800000305
Oil plug, fillingA
Oil plug, draining (Quick connect fitting)B
Required equipment
NoteEquipment
3HAC029646-001Oil plug sealing washer, gearbox
See section Type of lubrication in gearboxes
on page 151.
Lubrication oil
For article number see Spare part lists on
page 399.
Oil plug (Quick connect fitting)
Content is defined in section Standard tools
on page 393.
Standard toolkit
These procedures include references to the
tools required.
Other tools and procedures may be required.
See references to these procedures in the
step-by-step instructions below.
Additional equipment - Foundry Prime
NoteArt. no.Equipment
Mercasol3HAC034903-001Rust preventive
Continues on next page
Product manual - IRB 4600 Foundry Prime 119
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
3 Maintenance
3.4.2 Inspecting the oil level, axis 2 gearbox