ABB IRB 4600 Foundry Prime - Page 240

InformationAction
xx1100000058
Remove the nuts (B) on all the hose
clamps (A). Use standard tools.
Note
It is important to maintain the position
of the hoses and the hose clamps. Use
a cable strap to secure the position of
the rubber blocks.
10
xx1100000057
Remove all hose clamps (A) from the
lower arm.
11
Remove the Pneumatic hose - Foundry
Prime 2500 mm from the upper arm.
12
Continues on next page
240 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
4 Repair
4.3.3 Replacement of air nipples and hoses (Foundry Prime)
Continued