ABB IRB 4600 Foundry Prime - Page 373

Starting the calibration procedure
Use this procedure to call for the Axis Calibration method on the FlexPendant.
NoteAction
On the ABB menu, tap Calibration.
xx1500000942
1
All mechanical units connected to the system are
shown with their calibration status.
2
Tap the mechanical unit in question.
xx1500000943
Continues on next page
Product manual - IRB 4600 Foundry Prime 373
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
5 Calibration
5.4.4 Axis Calibration - Running the calibration procedure
Continued