xx1700000565
Precautionary measures
Note
It is strictly forbidden to expose any part of the robot to direct high pressure water
jet! The sealing joints between the moving parts on the wrist must not be exposed
to high pressure water.
Rebounding high pressure water jet must be avoided. ABB recommends using
a tool design with integrated covers that protect the wrist from direct or indirect
high pressure water jet.
Note
Make sure that the special Foundry Prime painting of the robot is not broken
during testing, installation, or repair work. Use the touch up kit available for
Foundry Prime (article number 3HAC035355-001) to repair any damages in the
paint.
Continues on next page
50 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
2 Installation and commissioning
2.2 Installation and operational requirements for Foundry Prime robots
Continued
To Next Page
Loading...
