Retaining ring, boreN
Washer, M16x70 quality 8.8 steelO
Hex socket head cap screw M16x70P
VK-coverQ
Required parts
NoteArt. no.Equipment
See chapter:
• Spare parts
Balancing device
For content see the figure in :
• Location of parts in maintenance
sets, cradle and shaft on page 312
See chapter:
• Spare parts
Maintenance parts, shaft
For content see the figure in:
• Location of parts in maintenance
sets, cradle and shaft on page 312
See chapter:
• Spare parts
Maintenance parts, cradle
3HAC037916-001Front shaft
3HAA2166-12VK cover
Required equipment - tools etc.
NoteArt. no.Equipment
Used to lock the screw that hold the
shaft in the front ear.
-Loctite 2701
12691907-001Loctite 577
M16x60 quality 12.9 Gleitmo.-Locking screw
For securing of the lower arm.
3HAB3537-1Bearing grease
3HAC042534-001Grease
-Grease pump
3HAC15556-1Lifting tool (chain)
3HAC020997-001Shackle
For unloading and restoring the balan-
cing device, (Method 1).
3HAC020902-001Press tool, balancing device
For unloading and restoring the balan-
cing device, (Method 2).
3HAC030662-001Distance tool
For dismantling and mounting of shaft
and bearings.
3HAC028920-001Dismantle and mounting tool
To be used with these tools:
• 3HAC028920-001
• 3HAC020902-001
3HAC11731-1Hydraulic cylinder
To be used with the hydraulic cylinder
3HAC11731-1.
3HAC13086-1Hydraulic pump,
80 MPa
Continues on next page
Product manual - IRB 6640 Foundry Prime 313
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.5.4.2 Replacing balancing device (design 2)
Continued
To Next Page
Loading...
