ABB PFEA 112 - Appendix H Actual Data and Settings at Commissioning; Document the Commissioning in this Form

Tension Electronics PFEA111/112, User Manual
Section H.1 Document the Commissioning in this Form
3BSE029380R0101 Rev C H-1
Appendix H Actual Data and Settings at Commissioning
H.1 Document the Commissioning in this Form
Fill in actual data and settings to document the commissioning.
Data and Settings PFEA111 PFEA112 Unit
Display language
Display unit N, kN, kg, lbs,
N/m, kN/m,
kg/m, pli
Web width m, inch
Object type
(Load cells per roll)
Standard roll
(2 load cells)
Standard roll
(2 load cells)
Single side A/B
(1 load cell)
Single side A/B
(1 load cell)
Load cell nominal load kN, lbs
Set wrap gain
- Wrap gain*
Voltage output
- Filter settings ms
- High Tension N, kN, kg, lbs,
N/m, kN/m,
kg/m, pli
- High Output V
- Low Tension N, kN, kg, lbs,
N/m, kN/m,
kg/m, pli
- Low Output V
- High Limit V
- Low Limit V
Current output
- Filter settings ms
- High Tension N, kN, kg, lbs,
N/m, kN/m,
kg/m, pli
- High Output mA
- Low Tension N, kN, kg, lbs,
N/m, kN/m,
kg/m, pli
- Low Output mA
- High Limit mA