ABB PFEA 112 User Manual

Tension Electronics PFEA111/112, User Manual
Section 3.12.9 Service Menu
3BSE029380R0101 Rev C 3-23
3.12.9 Service Menu
Figure 3-17. Service Menus
The service menu has parameters that can be viewed only and parameters that can be set.
• Parameters that can be viewed only:
– Software version number
– Maximum load A
Displays maximum load since last reset
– Present offset A
Displays zero offset at last zero set
– Maximum load B
Displays maximum load since last reset
– Present offset B
Displays zero offset at last zero set
• Parameters that can be set:
– Reset A
This action sets “Maximum load A” to zero.
– Reset B
This action sets “Maximum load B” to zero.
– Simulation
Activate/deactivate simulation function.
SetObject
FastSetUp
WebTension
Presentation-
Menu
NominalLoad
ZeroSet
SetWrapGain
> 5 s
CurrentOutput
VoltageOutput
Miscellaneous
Menu
ServiceMenu
From MiscellaneousMenu
ServiceMenu
AreYouSure ActionDone
(shown for 1 s.)
PFEA112
Version X.X
MaximumLoad A
[XXXXXX.X] N
PresentOffset A
XX.XX N
Reset A
AreYouSure ActionDone
(shown for 1 s.)
MaximumLoad B
[XXXXXX.X] N
PresentOffset B
XX.XX N
Reset B
Simulation
ZZZ

ABB PFEA 112 Specifications

General

Brand	ABB
Model	PFEA 112
Category	Measuring Instruments
Language	English