ABB PFEA 112 - Miscellaneous Menu; Profibus; Set Factory Default

Tension Electronics PFEA111/112, User Manual
Chapter 3 Commissioning
3-22 3BSE029380R0101 Rev C
3.12.8 Miscellaneous Menu
Figure 3-16. Miscellaneous Menus
3.12.8.1 Profibus
• Profibus On/Off
The Profibus can be enabled or disabled.
• Profibus address
If the Profibus is enabled, the Profibus address must be set in the range 000 - 125.
Read more about the Profibus in Section 3.13.
3.12.8.2 Set Factory Default
• Set factory default
The parameters are set as on delivery except Maximum load A and Maximum load B.
Read more in Appendix A.4 Factory Default Settings.
SetObject
FastSetUp
WebTension
Presentation-
Menu
NominalLoad
ServiceMenu
ZeroSet
SetWrapGain
> 5 s
CurrentOutput
VoltageOutput
Miscellaneous
Menu
From CurrentOutput
To
Miscellaneous
Menu
Profibus On/Off
[ZZ]
ProfibusAddress
[ZZ]
Profibus On/Off
ZZ
ProfibusAddress
ZZ
SetFactory
Default
AreYouSure ActionDone
(shown for 1 s.)
ServiceMenu
MeasuringRange
[XXXXX]
MeasuringRange
XXXXX
LoadDivision
[XXXXX]
LoadDivision
XXXXX