ABB REC650 ANSI - Page 381

Signals
Table 264: OR Input signals
Name
Type Default Description
INPUT1 BOOLEAN 0 Input signal 1
INPUT2 BOOLEAN 0 Input signal 2
INPUT3 BOOLEAN 0 Input signal 3
INPUT4 BOOLEAN 0 Input signal 4
INPUT5 BOOLEAN 0 Input signal 5
INPUT6 BOOLEAN 0 Input signal 6
Table 265: OR Output signals
Name Type Description
OUT BOOLEAN Output signal
NOUT BOOLEAN Inverted output signal
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
11.3.1.3 Inverter function block INVERTER
Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Inverter function block INVERTER - -
Function block
INVERTER
INPUT OUT
IEC09000287-1-en.vsd
IEC09000287 V1 EN
Figure 168: INVERTER function block
1MRK 511 287-UUS A Section 11
Logic
375
Technical manual