EasyManua.ls Logo

ABB REC650 ANSI - Electromagnetic Compatibility Tests

ABB REC650 ANSI
700 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 18 IED and functionality tests
18.1 Electromagnetic compatibility tests
Table 568: Electromagnetic compatibility tests
Description Type test value Reference
100 kHz and 1 MHz burst
disturbance test
IEC 61000-4-18, level 3
IEC 60255-22-1
ANSI C37.90.1-2012
Common mode
2.5 kV
Differential mode 2.5 kV
Electrostatic discharge test IEC 61000-4-2, level 4
IEC 60255-22-2
ANSI C37.90.3-2001
Contact discharge
8 kV
Air discharge 15 kV
Radio frequency interference
tests
Conducted, common mode 10 V (emf), f=150 kHz...80 MHz IEC 61000-4-6 , level 3
IEC 60255-22-6
Radiated, amplitude-
modulated
20 V/m (rms), f=80...1000 MHz
and f=1.4...2.7 GHz
IEC 61000-4-3, level 3
IEC 60255-22-3
ANSI C37.90.2-2004
Fast transient disturbance tests
IEC 61000-4-4
IEC 60255-22-4, class A
ANSI C37.90.1-2012
Communication ports
4 kV
Other ports 4 kV
Surge immunity test IEC 61000-4-5
IEC 60255-22-5
Communication 1 kV line-to-ground
Other ports 2 kV line-to-ground, 1 kV line-to-
line
Power supply 4 kV line-to-ground, 2 kV line-to-
line
Table continues on next page
1MRK 511 287-UUS A Section 18
IED and functionality tests
651
Technical manual

Table of Contents

Related product manuals