ABB REC650 ANSI - Insulation Tests

Description Type test value Reference
88 – 216 MHz < 43,52 dB(µV/m) quasi peak,
measured at 10 m distance
216 – 960 MHz < 46,44 dB(µV/m) quasi peak,
measured at 10 m distance
960 – 1000 MHz < 49,54 dB(µV/m) quasi peak,
measured at 10 m distance
18.2 Insulation tests
Table 569: Insulation tests
Description Type test value Reference
Dielectric tests: IEC 60255-5
ANSI C37.90-2005
• Test voltage 2 kV, 50 Hz, 1 min
1 kV, 50 Hz, 1 min,
communication
Impulse voltage test: IEC 60255-5
ANSI C37.90-2005
• Test voltage 5 kV, unipolar impulses,
waveform 1.2/50 μs, source
energy 0.5 J
1 kV, unipolar impulses,
waveform 1.2/50 μs, source
energy 0.5 J, communication
Insulation resistance
measurements
IEC 60255-5
ANSI C37.90-2005
• Isolation resistance >100 MΏ, 500 V DC
Protective bonding resistance IEC 60255-27
• Resistance <0.1 Ώ (60 s)
18.3 Mechanical tests
Table 570: Mechanical tests
Description
Reference Requirement
Vibration response tests
(sinusoidal)
IEC 60255-21-1 Class 1
Vibration endurance test IEC60255-21-1 Class 1
Shock response test IEC 60255-21-2 Class 1
Table continues on next page
1MRK 511 287-UUS A Section 18
IED and functionality tests
653
Technical manual