ABB REC650 ANSI - Section 2 Available Functions; Control and Monitoring Functions

Section 2 Available functions
2.1 Control and monitoring functions
IEC 61850 or Function
name
ANSI Function description Bay
REC650
REC650 (A01A) 3Ph/1CBA REC650 (A02A) 3Ph/1CBAB REC650 (A07A) BCAB
Control
SESRSYN 25 Synchrocheck, energizing check, and
synchronizing
0–1 1 1 1
SMBRREC 79 Autorecloser for 3–phase operation 0–1 1 1 1
SLGGIO Logic Rotating Switch for function selection and
LHMI presentation
15 15 15 15
VSGGIO Selector mini switch 20 20 20 20
DPGGIO IEC 61850 generic communication I/O functions
double point
16 16 16 16
SPC8GGIO Single point generic control 8 signals 5 5 5 5
AUTOBITS AutomationBits, command function for DNP3.0 3 3 3 3
I103CMD Function commands for IEC60870-5-103 1 1 1 1
I103IEDCMD IED commands for IEC60870-5-103 1 1 1 1
I103USRCMD Function commands user defined for
IEC60870-5-103
4 4 4 4
I103GENCMD Function commands generic for IEC60870-5-103 50 50 50 50
I103POSCMD IED commands with position and select for
IEC60870-5-103
50 50 50 50
Apparatus control and Interlocking
APC8 Apparatus control for single bay, max 8 app. (1CB)
incl. interlocking
1 1 1 1
SCILO 3 Logical node for interlocking 8 8 8 8
BB_ES 3 Interlocking for busbar earthing switch 3 3 3 3
A1A2_BS 3 Interlocking for bus-section breaker 2 2 2 2
A1A2_DC 3 Interlocking for bus-section disconnector 3 3 3 3
ABC_BC 3 Interlocking for bus-coupler bay 1 1 1 1
Table continues on next page
1MRK 511 287-UUS A Section 2
Available functions
37
Technical manual