15.6.3 Settings
Table 506: TERMINALID Non group settings (basic)
Name
Values (Range) Unit Step Default Description
StationName 0 - 18 - 1 Station name Station name
StationNumber 0 - 99999 - 1 0 Station number
ObjectName 0 - 18 - 1 Object name Object name
ObjectNumber 0 - 99999 - 1 0 Object number
UnitName 0 - 18 - 1 Unit name Unit name
UnitNumber 0 - 99999 - 1 0 Unit number
IEDMainFunType 0 - 255 - 1 0 IED main function type for IEC60870-5-103
TechnicalKey 0 - 18 - 1 AA0J0Q0A0 Technical key
15.7 Product information
15.7.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Product information PRODINF - -
15.7.2 Functionality
The Product identifiers function identifies the IED. The function has seven pre-set,
settings that are unchangeable but nevertheless very important:
• IEDProdType
• ProductVer
• ProductDef
• SerialNo
• OrderingNo
• ProductionDate
The settings are visible on the local HMI , under Main menu/Diagnostics/IED status/
Product identifiers
They are very helpful in case of support process (such as repair or maintenance).
1MRK 511 287-UUS A Section 15
Basic IED functions
607
Technical manual
To Next Page
Loading...
