ABB REC650 ANSI - Page 400

Signals
Table 310: RSMEMORYQT Input signals
Name
Type Default Description
SET BOOLEAN 0 Input signal to set
RESET BOOLEAN 0 Input signal to reset
Table 311: RSMEMORYQT Output signals
Name Type Description
OUT BOOLEAN Output signal
NOUT BOOLEAN Inverted output signal
Settings
Table 312: RSMEMORYQT Group settings (basic)
Name Values (Range) Unit Step Default Description
Memory Disabled
Enabled
- - Enabled Operating mode of the memory function
11.3.2.10 INVALIDQT function block
Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
INVALIDQT function block INVALIDQT - -
Section 11 1MRK 511 287-UUS A
Logic
394
Technical manual