ADCMT 6244 User Manual

6243/44 DC Voltage Current Source/Monitor Operation Manual
2.2.5 Sweep Mode Measurement
2-27
Setting the period
22. Press the key twice or press the MENU key. The parameter group selection
screen returns. Select TIME in the parameter group by rotating the Data knob.
23. Press the key and select the Period parameter by rotating the Data knob.
24. Press the key.
25. Press the 1, 0, 0, and ENTER keys.
Turning ON the Memory Store
26. Press the key twice and select MEASURE BUFFER in the parameter group
by rotating the Data knob.
27. Press the key.
28. Press the key and change the display to Normal by rotating the Data knob.
29. Press the EXIT key.
The measurement screen returns.
NOTE: The following show the ideal source and measurement values assuming no
errors exist in the measured object (the 1 K resistor), the cable resistance,
and the 6243/44 itself.
Actual values will be different from the values used here due to the above
error factors.
AZERO
Period
[050.00ms]
AZERO
Period
[100.00ms]
AZERO
MEASURE BUFFER
Memory Store :OFF
AZERO
Memory Store
Normal-ON

ADCMT 6244 Specifications

General

Brand	ADCMT
Model	6244
Category	Measuring Instruments
Language	English