5702269-C Installation 5-21
Pinnacle™ Plus+ 10 kW
In the Sync Pulse system all units pulse at the same frequency but may have their own
unique output power set point. Additionally, all units must have the same duty cycle
and reverse time.
Note: If different duty cycles and reverse times are desired for your process, operate
the Pinnacle Plus+ units as independent units.
Figure 5-13. Simple Sync Pulse system
SYNC PULSE MASTER/SLAVE SYSTEM
You can place a series of master/slave Pinnacle Plus+ systems together in a sync pulse
system, allowing for extraordinary control over hard arcs across a large network of
power supplies.
To Next Page
Loading...