Aerotech Ensemble HLe User Manual

62 Chapter 2 www.aerotech.com
2.5.6. Analog Output 0 (J205)
The analog output is set to zero when power is first applied to the system or during a system reset.
Table 2-35: Analog Output 0 Specifications (TB102B)
Specification Value
Output Voltage -10 V to +10V
Output Current 5 mA
Resolution (bits) 16 bits
Resolution (volts) 305 µV
Table 2-36: Analog Output Pins on the Auxiliary I/O Connector (J205)
Pin# Description In/Out/Bi
22 Analog Output 0 Output
23 Analog Common -
Figure 2-33: Analog Output 0 (J205)
Ensemble HLe Installation and Configuration

Aerotech Ensemble HLe Specifications

General

Brand	Aerotech
Model	Ensemble HLe
Category	Controller
Language	English