1. Disconnect the cable of the radiation meter.
1.
cable connecting the radiation meter to the generator
2. Unscrew the screw on the left hand side of the rail system.
3. Pull out the radiation meter.
The DAP meter is calibrated during production to be used up to 2000 m
altitude. Using the DAP meter on higher altitudes requires the application of a
correction factor.
Related Links
Dose Area Product Meter (VacuTec DAP) Technical Data on page 247
148 | DR 400 | Radiographic Table and X-Ray Tube Stand
3231E EN 20210708 1530
To Next Page
Loading...
