(example of subtypes 5521/400,
5521/410)
This mark indicates that the
equipment has a Type B applied
part
Top side according to patient ori-
entation to indicate the orienta-
tion of the AEC sensors (optional)
The patient must not sit on the
end of the tabletop, since the
weight load can lead to table de-
formations and damage to the
product.
Related Links
Radiographic Table and X-Ray Tube Stand Technical Data on page 233
48 | DR 400 | Introduction to DR 400
3231E EN 20210708 1530
To Next Page
Loading...
