Entering a Method
User Information 105
To confirm the method chain, highlight Chain Methods again
and press Enter. This displays the current chain sequence. For
example, a chain using methods 1, 2, and 3 displays the
following:
Actual chain
1+2+3
Methods run in order from left to right on the display. This
method sequence is active until you edit it or load a new
method.
Deactivate a Method Chain
To deactivate a Method Chain:
1 Highlight Chain Methods. The display shows:
Actual chain
#+#+#+#
where # is the number of a method.
2 Press 0 followed by Enter. The display shows:
Actual chain
Chain off
medium_standard.book Page 105 Tuesday, February 17, 2004 10:14 AM
To Next Page
Loading...
