Introduction
User Information 23
Fuses
Table 1 lists the fuses required for proper operation. These
fuses should only be accessed by Agilent service personnel.
Cleaning
To clean the unit, disconnect the power and wipe down with a
damp, lint-free cloth.
Recycling the Product
For recycling, contact your local Agilent sales office.
Tabl e 1 Fuses
Fuse designation Location Fuse rating and type
F2, F3 Power line module 10A 250V, glass tube
F3 Terminal near
transformer
8A 250V, glass tube
F3, F4 Power board 6A 125V, glass tube
F1 Power board 1A 250V, glass tube
medium_standard.book Page 23 Tuesday, February 17, 2004 10:14 AM
To Next Page
Loading...
