The Keypad
User Information 51
Start/Stop key
Press this key to start or stop a run. To start a run, press once.
To stop a run, press the key again. The display reads:
PRESS STOP TO CONFIRM
This prevents an inadvertent run interruption. To stop, press
the key again. To continue the run, press Clear.
• When the sampler stops during a run, the vials in the oven
automatically return to the sample tray. The method cannot
be resumed. To continue the analysis from the last vial
sampled, change the method so that it starts with the correct
vial.
medium_standard.book Page 51 Tuesday, February 17, 2004 10:14 AM
To Next Page
Loading...
