106 User Information
Entering a Method
Using a Method Chain for MHE
Use Chain Methods to perform a MHE with multiple punctures
and constant equilibration time for each extraction.
To run an MHE:
1 Key in the parameters for Zone Temps, Event Times and Vial
Parameters for the method. See page 94.
2 Store this method in one of the four storage locations. See
page 102.
3 Press the following:
Chain Methods {X + X + X + X }
where X is the location of the stored method.
medium_standard.book Page 106 Tuesday, February 17, 2004 10:14 AM
To Next Page
Loading...
