Advanced Functions
User Information 65
List of Advanced Functions
Tabl e 5 Quick reference of Advanced functions
Display Definition/Function Menu selection keys Page
STABILIZE TIME Sets wait time between oven reaching initial
setpoint and first vial loading
1 67
PARAM. INCREMENT Creates stepwise increments in oven temperature
or equilibration time for subsequent vials
2 68
VIAL NO. AND LOC. Displays the vial number in each oven carousel
location. Vial numbers correspond to the original
tray position of the vial.
3 70
KEYBOARD LOCK Disables all keyboard functions except navigation
and method start/stop
4 71
MANUAL OPERATION Allows the user to manually move all motors,
lifters, the tray, and the shutter, and open and
close all valves on the Headspace Sampler
5 72
PRESSURE UNITS Changes the pressure units 6 73
STORED METHOD Load one of five preset methods 7 74
MULTI. HS EXTR. Sets parameters for multiple headspace
extraction
8 75
CHECK FOR READY Tells the HS whether or not to look for a ready
signal from the GC before injecting
9 76
RESET Select Reset to force the sampler to abort
whatever it is doing and rerun its startup routine.
Vials return to the tray.
., 0 78
VALVE COUNT Use this function to view/reset the number of
valve cycles for the sample inject valve
., 1 79
VIAL SIZE Choose 10-mL or 20-mL vials ., 2 80
ZONE CALIBRATION Create a custom temperature offset for the oven
and sample loop heated zones
., 3 81
LAN CONFIGURATION Sets the IP Address, subnet mask, and gateway ., 4 82
MAC ADDRESS Displays the MAC Address ., 5 83
medium_standard.book Page 65 Tuesday, February 17, 2004 10:14 AM
To Next Page
Loading...
Need help?
General
