Safety Notices
A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not
correctly performed or adhered to, could result in damage to the product or loss of important data. Do not proceed
beyond a CAUTION notice until the indicated conditions are fully understood and met.
A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not
correctly performed or adhered to, could result in personal injury or death. Do not proceed beyond a WARNING notice
until the indicated conditions are fully understood and met.
Safety Symbols
Alternating current
Frame or chassis terminal
Standby supply. Unit is not completely disconnected from AC mains power when switch is off.
Risk of electric shock
Refer to accompanying documents
The CE mark indicates the instrument meets the requirements of the applicable European Community
Directives to be placed on the European Community market. "ISM 1-A" indicates that the instrument is an
"Industrial, Scientific and Medical Class A, Group 1" product.
The CE mark is a registered trademark of the European Community.
The CSA mark with the 'c' and 'us' subscript indicates the instrument is certified to the applicable Canadian
and United States of America standards respectively.
CAT II
(300V)
IEC Measurement Category II. Inputs may be connected to AC mains power (up to 300 VAC) under Category
II overvoltage conditions.
The C-tick mark is a registered trademark of the Spectrum Management Agency of Australia. This signifies
compliance with the Australian EMC Framework regulations under the terms of the Radio Communications
Act of 1992.
ICES-
001
NMB-
001
This mark indicates the instrument complies with the Canadian Interference-Causing Equipment Standard
for Industrial, Scientific and Medical (ISM) Radio Frequency Generators.
This equipment is Class A suitable for professional use and is for use in electromagnetic environments outside
of the home.
Contains one or more of the 6 hazardous substances above the maximum concentration value (MCV), 40
Year EPUP.
4 Agilent Truevolt Series DMM Operating and Service Guide
To Next Page
Loading...
Need help?
General
