111
Chapter 10: Project Management (Project Mode)
2 Disk free
Displays the amount of free space on the current disk.
3 Current Project
Displays the current Project information (Project name, size, number of bits, sampling rate).
4 [F1] ( MORE) key
This function key is used to recall the screen to back up Projects on the current disk to an external SCSI device
or DAT machine. (See page 118.)
5 [F2] ( CD-R) key
This function key is used to recall the screen to create an audio CD using a CD-R/CD-RW drive connected to
the SCSI connector. (See page 113.)
6 [F3] ( ERASE) key
This function key is used to recall the screen to erase a Project individually on the current disk. (See page 113.)
7 [F5] ( NEW) key
This function key is used to recall the screen to create a new Project. (See page 112.)
8 [F6] ( SELECT) key
This function key is used to select the current Project. (See page 111.)
Selecting a current Project
When you turn on the power to the DPS16, it will automatically recall the Project used last time as the Current
Project. However, you can select a different Project as the Current Project by following the steps below.
1. Move the cursor to the Project you wish to select in the Project list (1).
2. Press the [F6] (SELECT) key.
The Project you selected in step 1 becomes the current Project and appears in the Current Project field
(3).
Pressing the [NUMBER/NAME] key on the Project screen enables you to change the name of the Project
indicated in the Current Project field. See page 17 for more information on entering characters.
To Next Page
Loading...
Need help?
General
