14
Chapter 1: Overview of the DPS16
Scene memory
The DPS16 can store a set of mix parameter settings as a scene, and recall the scene later. A scene is stored as
part of the Project on the disk. You can store up to 8 scenes in one Project. For example, you may store
multiple scenes with different balance and EQ settings for mixdown, and audition and compare different
mixes.
The following main parameters are stored in a scene.
• Channel on/off
• Channel level
• Channel panning
• Channel AUX send
• Channel EQ setting
• Channel on/off for the ping-pong bus
• Master level (Master bus output level)
• AUX send master level
• Effect settings
The DPS16’s user interface
This section explains basic operation of the DPS16, such as using the display and changing the values.
Using the display
Various information required for operating the DPS16, such as the current position, mix parameter settings, etc.,
appears on the display. The information varies depending on which key you operate.
■ Screen
A display that appears when you press a mode key is called a “screen”. For example, the following display is a
Main screen that is accessed when you turn on the power to the DPS16 or when you press the [MAIN SCREEN]
key. You will use this screen for recording and playback.
4
1 2 3
6
7
8
9
5
To Next Page
Loading...
Need help?
General
