Akai DPS16 User Manual

46
Chapter 3: Transport/Locate Operation
Deleting a locate point from the locate list
You can delete a locate point stored in the locate list.
1. Press the [GO TO] key while the DPS16 is stopped.
The Locate List window appears, showing the list of stored locate points.
2. Use the [CURSOR] keys or the [JOG] wheel to select a locate point you wish to delete.
3. Press the [F4] (ERASE) key.
The selected locate point is deleted.
✐ TIP : Press the [F1] (CLOSE) key to cancel the delete operation.
Using the Direct Locate function
The Direct Locate function enables you to assign locate points to the [INPUT SELECT] keys and the [TRACK
SELECT]
keys to locate a point immediately.
■ Storing direct locate points
1. Press the [MEMORY] key to capture the desired locate point.
You may store locate points while the DPS16 is recording, playing, or stopped. When you press the
[MEMORY] key, the following Locate Memory window opens, indicating the time value in the Time field at
which you pressed the [MEMORY] key.
2. Press one of the [INPUT SELECT] keys or [TRACK SELECT] keys.
The captured locate point is stored in the specified key as a direct locate point.
✐ TIP : Press the [F1] (CLOSE) key to cancel the operation.
■ Using the stored direct locate points
1. Press the [GO TO] key while the DPS16 is stopped.
The Locate List window appears.
2. Press one of the [INPUT SELECT] keys or the [TRACK SELECT] keys.
The DPS16 locates the point stored in the key you pressed and closes the window.

Akai DPS16 Specifications

General

Brand	Akai
Model	DPS16
Category	Recording Equipment
Language	English