176
Chapter 13: Using the Effects
AUTOWAH
This monaural effect adds a swelling wah.
1
2
3
4
Parameter Setting range Function
1 Rate *1 0.1Hz – 10.0Hz Adjusts the speed (rate) of swelling (LFO) of the wah effect.
2 Depth *2 0 – 127 Adjusts the depth of the effect.
3 Reso *3 0 – 127 Adjusts the amount of resonance.
4 Effect ON/BYPASS Selects whether the effect is enabled (ON) or bypassed (BYPASS).
TOUCH WAH
This monaural effect adds a wah effect to signals at a certain level or higher.
1
2
3
4
Parameter Setting range Function
1 Thresh *1 –60dB – 0dB Adjusts the signal level at which the wah effect becomes effective.
2 Depth *2 0 – 127 Adjusts the depth of the effect.
3 Reso *3 0 – 127 Adjusts the amount of resonance.
4 Effect ON/BYPASS Selects whether the effect is enabled (ON) or bypassed (BYPASS).
To Next Page
Loading...
Need help?
General
