Akai DPS16 User Manual

74
Chapter 6: Mixer Function (Mixer Mode)
3. Press the [F4] ( STORE) key.
The current mix parameter settings are stored and the scene name changes from “ (unused)” to “SCENE
MEMORY”.
✐ TIP : You can name a scene using the [NUMBER/NAME] key after step 3, if necessary.
➸ NOTE : If you try to store a scene to a number which already has a stored scene, the following screen
appears. If you wish to overwrite the memory, press the [F3] (DO IT ) key. If you wish to cancel the store
operation, press the [F1] (CANCEL) key.
4. Press the [F1] ( CLOSE) key to complete the scene memory operation.
■ Recalling a scene
1. While the Control View page or the Channel View page is displayed in Mixer mode, press the [F4]
( SCENE) key to recall the Scene Memory page.
2. Use the [CURSOR] key to move the cursor to the number of the scene memory you wish to recall.
ex: Scene Memory number 6 is selected.
3. Press the [F3] ( RECALL) key.
The mix parameters of the DPS16 change to the settings of the selected scene, and the Mixer mode screen
appears.
➸ NOTE : You cannot recall the current mixer settings once you recall the scene. If you need to recall the
current mixer settings, first store them as a scene.

Akai DPS16 Specifications

General

Brand	Akai
Model	DPS16
Category	Recording Equipment
Language	English