27
Chapter 2: Recording on the DPS16
6. Press the [ ] button while holding down the [REC] button and start playing the rhythm machine.
Recording starts on the tracks in record-ready mode (tracks 1 and 2).
7. Press the [ ] button when recording is complete.
8. Press the [ ] button to check the recorded tracks.
Pressing the [ ] button will cause the time counter on the Main screen to return to zero (00:00:00:00.0).
✐
TIP :
To locate a point, you can use various methods besides using the transport buttons. Refer to “Chapter
3: Transport/Locate Operation”.
9. Press the [ ] button to start playback from the top of the song.
When the DPS16 plays back data, you can monitor the recorder’s playback sound through any track, regard-
less of the on/off status of their [RECORD SELECT] keys. The Track View screen indicates a bar graph of
audio data.
Current position
Audio data
10.
If you are satisfied with the recording on the tracks, press [RECORD SELECT] keys 1 and 2 to cancel
the record-ready statuses of tracks 1 and 2.
The LED of the corresponding [RECORD SELECT] keys turns off.
To Next Page
Loading...
Need help?
General
