84
Chapter 7: Advanced Technique for Mixing
9. Raise the master fader up to the = mark.
The proper level cannot be monitored when the 1/2 channel faders are raised up at this time, since the bus sound
are mixed together.
10.
Press the [MIXER] key to place the DPS16 in Mixer mode, and while playing the rhythm machine,
adjust the pan, EQ, and level of INPUT MIX channels 1–8.
✐
TIP :
Check the output level from the ping-pong bus using the level meter for TRACK MIX channels 1 and 2.
11.
Start recording on the DPS16.
Input 1–8 signals are recorded to tracks 1 and 2 via the INPUT MIX channels 1–8 through the ping-pong bus.
✐
TIP :
You can also insert the internal effects to any channel. For more information, refer to “Using effects
during ping-pong recording” in Chapter 13.
To Next Page
Loading...
Need help?
General
