105
• Preferences: Registration Tab
Here, you can view your hardware
registration information (or unlock your MPC
software by clicking Unlock Now, if you
have not already done so).
• Preferences: Other Tab
Here, you can set various other MIDI and
audio parameters.
Hardware: Press Shift + Song and then
press F1 (Prefs). Use the Cursor Buttons to
select the corresponding option, and use
the Data Dial or -/+ buttons to change it.
Not all options in the software's Other tab
are available in the MPC hardware display,
and some options are shown that are
available in other tabs in the software.
o Tap Tempo: Click this drop-down
menu to set how many times you have to press your MPC hardware's Tap Tempo button until
the new tempo is recognized.
o Filter 'All Notes Off' CC: Check this box to filter out All Notes Off data. If you have connected
another device to your MPC hardware's MIDI In, checking this box will cause the software to
ignore "All Notes Off" ("MIDI panic") messages. That is, if a MIDI device sending MIDI
messages into the MPC hardware sends a MIDI panic message, the software will not stop all
notes and will continue as before (recording, for instance).
o Program Change: Click this drop-down menu to select what an incoming MIDI Program
Change message will change: a Program, Sequence, or Track.
To Next Page
Loading...
Need help?
General
