Akai MPC User Manual

219
Hardware:
1. Press F2 (TrkGroup) to activate Track Group.
2. Press a pad to select it. Use the Pad Bank buttons to switch between the 16 banks, if necessary.
3. Use the Data Dial or -/+ buttons to select the desired Mute Group number.
• When a pad in a Mute Group is selected, the other pads in that same Mute Group will blink yellow.
• Press F6 (Solo) to solo the selected pad.
• Press F4 (Time Div) and use the Data Dial or -/+ buttons to edit the Time Correct value. Press F5
(T.C.) to activate or deactivate Time Correct.
The Track Group section in the display of the MPC hardware.
Project Information
This is identical to the Project Information in Main Mode. For more information, please see Main Mode >
Project Information.

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired