Akai MPC User Manual

98
Exit closes the software. If you have not saved any changes made to a currently open project, it will
prompt you to do so before quitting.
Mac OS X users: The Exit command is named Quit MPC and located in the MPC menu.
Edit Menu
Undo undoes the last action you performed. When there are no actions left to undo, the Undo command
will be unavailable and appear greyed out.
Redo undoes the Undo command. You can continue redoing actions until there are no items left to redo,
in which case, the Redo command will be unavailable and appear greyed out.
Important: If you perform a new action when the Redo command is available, you will no longer be able
to redo. In other words, as soon as you perform an editing action other than Undo, Redo is no longer
available.
History lets you view a list of previously executed
commands in the Command History window. As
you undo and redo commands, you can see your
current "position" in the list of commands in the
window.
To revert to a previous "state" in your Project,
click and drag the point just after the last step.
Any "undone" steps will be greyed out. You can
do the same to redo all the greyed-out steps, as
well.
Cut removes selected events from the grid and copies it to the clipboard. After cutting events, you can
paste or insert them at another location in the same or another Sequence.
Copy copies selected events from the grid to the clipboard without removing them. After copying
events, you can paste or insert them at another location in the same or another Sequence.

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired