Akai MPC User Manual

162
Mute and Solo
In the software, click the Track's Mute button (M) to mute it.
Hardware: To mute a channel, press F3 (Mute) and touch the top of the corresponding Q-Link
Knob to toggle between "mute" and "mute off." You can use the Pad Bank buttons to select
different sets of 16 Tracks.
To solo a Track, click its Solo button (S), which will mute all other Tracks. You can solo as many
Tracks as you like. To deselect solo, click the active solo button.
Alternatively, you can click the Mute button (M) or Solo button (S) for the horizontal track above to mute
or solo it.
You can also mute or solo each Program within Track Mixer Mode by clicking the M or S button for a
Program Channel strip. (If the Program Channel strips are not shown, click the plug icon to the left of the
Track channel strips or in the upper-left corner of the grid.)
Hardware:
To mute a Track:
1. Use the Cursor Buttons to select the Mixer field, and then use the Data Dial or -/+ buttons to set
it to Tracks.
2. Press the F3 (Mute) and use the corresponding Q-Link Knobs for editing. You can use the Pad
Bank buttons to select different sets of 16 Tracks.
To mute a Program:
1. Use the Cursor Buttons to select the Mixer field, and then use the Data Dial or -/+ buttons to set
it to Programs.
2. Press the F3 (Mute) and use the corresponding Q-Link Knobs for editing. You can use the Pad
Bank buttons to select different sets of 16 Programs.

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired