151
Program Mixer Mode works like a regular audio mixer and offers various settings for each channel. All
channels' functionality is identical. If a sample has been assigned to a pad, its name is displayed below
the channel fader.
The channel strip on the right-most side of this area is the Program Channel strip (if visible). It works the
same way as described in Main Mode > Program Channel Strip. Any other channel strips whose
routing is set to Program will be routed to the Program Channel.
To view more mixer channels, use the scroll bar under the channel faders at the bottom of the window.
Show/Hide Buttons
In the software, the Channel View buttons on the left side of the pad channel strip area determine which
channel strips are visible.
• Click the first (top-most) button to show or hide the Program Channel strip, which is on the
right-most side of the channel strip area.
• Click the second button (Show all pads) to show all channel strips, whether or not their
pads have samples or events.
• Click the third button (Show pads with samples) to show channel strips whose pads
contain samples.
• Click the fourth button (Show pads with events) to show channel strips whose pads
contain events.
• Click the fifth button (Show pads with samples or events) to show channel strips whose
pads contain samples or events.
When Show pads with events or Show pads with samples or events is selected, you
can click the sixth (lower-most) button (Filter events in track/sequence) to show
channel strips for all events in the Track (T) or all events in the Sequence (S).
To Next Page
Loading...
Need help?
General
